“`
Commercial Door Repair Near Me
When a commercial door will not open, close, latch, or lock properly, the problem can quickly affect customer access, employee safety, building security, ADA accessibility, and daily operations.
Automatic Door Doctors provides commercial door repair throughout the Denver metro area. We service storefront doors, hollow metal doors, automatic doors, ADA door openers, door closers, panic hardware, fire-rated doors, aluminum glass doors, and access-control-related door hardware.
Finding the Right Commercial Door Repair Company
Commercial doors are more complex than most residential doors. The visible problem may involve the door itself, but the actual cause could be a worn hinge, damaged pivot, misaligned frame, defective closer, loose operator arm, failing lock, damaged strike, threshold interference, or access-control problem.
A commercial door technician should evaluate the complete opening rather than replacing parts based only on the most obvious symptom. This helps identify the underlying cause and reduce repeated repairs.
Commercial Door Problems We Repair
Door Will Not Close
A damaged closer, worn hinge, frame misalignment, air-pressure issue, or obstruction may prevent the door from closing completely.
Door Will Not Latch or Lock
The latch, strike, lock, closer, frame, or door alignment may prevent the opening from securing correctly.
Door Drags or Rubs
Worn hinges, damaged pivots, loose fasteners, frame movement, or threshold interference can cause the door to scrape or bind.
Door Slams or Closes Too Slowly
A commercial door closer may need adjustment, repair, or replacement when closing speed becomes unsafe or unreliable.
Automatic Door Will Not Operate
The cause may involve the operator, activation button, sensor, receiver, power supply, wiring, lock, or mechanical door resistance.
Panic Hardware Is Not Working
Exit devices can become loose, difficult to operate, fail to latch, or stop coordinating correctly with electrified hardware.
Commercial Door Systems We Service
✓ Aluminum storefront and glass doors
✓ Hollow metal doors and frames
✓ Automatic sliding and swinging doors
✓ Low-energy ADA door operators
✓ Commercial door closers
✓ Panic bars and exit devices
✓ Fire-rated doors and hardware
✓ Hinges, pivots, continuous hinges, and thresholds
✓ Electric strikes and electrified locks
✓ Access-control-related door hardware
What You Can Check Safely
✓ Look for floor mats, boxes, carts, ice, or debris blocking the opening.
✓ Note whether the door rubs at the top, bottom, or latch side.
✓ Check whether the problem occurs only when the door is locked.
✓ Determine whether the issue changes with wind, weather, or building air pressure.
✓ Test whether one ADA push button works while another does not.
✓ Note any grinding, scraping, clicking, or slamming sounds.
✓ Keep customers and employees away if the door is moving unpredictably.
When Commercial Door Repair Should Not Wait
Some door problems can become serious operational issues. Prompt service is recommended when a commercial door:
✓ Will not close, latch, or lock
✓ Blocks a required entrance or exit
✓ Slams or moves unpredictably
✓ Has broken glass, loose hardware, or visible frame damage
✓ Prevents accessible entry into the building
✓ Will not release from electric locking hardware
✓ Remains open and leaves the building unsecured
If an opening cannot be used safely, keep people away and use another approved entrance or exit until the door can be evaluated.
Why the Entire Door Opening Matters
A commercial door is a connected system. Replacing a closer will not solve the problem if the door is sagging. Installing a new lock may not help if the door and frame are misaligned. Replacing an automatic operator may lead to premature wear if the door is dragging or fighting damaged hardware.
A technician should inspect how the complete opening:
✓ Opens and closes manually
✓ Moves through the frame and across the threshold
✓ Interacts with hinges, pivots, and the closer
✓ Latches, locks, and secures
✓ Responds to automatic activation devices
✓ Coordinates with panic and access-control hardware
✓ Performs during normal traffic and weather conditions
Can the Existing Commercial Door Be Repaired?
Many commercial door problems can be corrected by adjusting, repairing, or replacing individual components. Depending on the condition of the opening, repairs may involve hinges, pivots, closers, locks, strikes, thresholds, panic hardware, operator components, or damaged frame sections.
Replacement may be more appropriate when the door or frame is severely damaged, repeatedly failing, badly corroded, obsolete, or no longer suitable for the building’s security, accessibility, or traffic needs.
A complete inspection can help determine whether repair or replacement provides the better long-term value.
Information That Helps the Technician
✓ The building address and location of the affected door
✓ Whether the door is an entrance, exit, interior, or secure opening
✓ A description of what the door is doing
✓ When the problem started
✓ Whether the issue is constant or intermittent
✓ Any recent impacts, construction, weather, or access-control changes
✓ Photos of the door, frame, hardware, and visible damage when available
Providing these details can help the service team prepare for the opening before arriving.
Call Automatic Door Doctors
Automatic Door Doctors provides commercial door repair for businesses, property managers, schools, medical facilities, churches, retail stores, apartment communities, warehouses, and other commercial properties throughout the Denver metro area.
We repair and service commercial doors, automatic doors, ADA door openers, storefront doors, door closers, panic hardware, fire-rated doors, hollow metal doors, aluminum glass doors, electric strikes, and access-control-related door hardware.
“`
(303) 500-6105
Denver, CO